GPS 4 Way Active Splitter


The Global Professional GPS Active 4 way Splitter has been designed to allow the signal from a GPS antenna to be shared between four receivers.

The unit is configured to insert a  DC voltage to the antenna via a solder feed through.Voltage required must be specified when ordering.

DC loaded to all output ports.

All output ports incorporate a 200ohm dc load to simulate an Antenna DC current draw.

Available in 'N', 'F', 'BNC' & 'SMA' Connector configurations.Other powering options are available upon request.

Click here for DATA SHEET

Weight 0.4kg
Frequnecy Pass 950MHz - 2150MHz
Through Loss 1dB +/-0.5dB
Port to Port Isolation +20dB
Return Loss +15dB
Supply Voltage 12 -48V DC
Max DC Current Handling 1 Amp
Current Consumption 60mA
Dimensions 116mm x 66mm x 26mm